Table of Contents
Advertisement
STEP 10:
The configuration is successful when the screen below is displayed. (Figure-6)
Figure-6 Complete Setting
Please make sure that all the computers that are connected to the LAN port have their
Default Gateway IP Address set to the Content Security Gateway's LAN IP Address (i.e.
192.168.1.1). At this point, all the computers on the LAN network should gain access to
the Internet immediately. If a Content Security Gateway filter function is required, please
refer to the Policy section in the user's manual.
5. Further Configuration
The above steps introduce simple configuration for CS-2000. For further configuration,
such as the Anti-Spam, Anti-Virus, IDP, VPN and System Configuration etc., please
refer to the user's manual in the CD.
Advertisement
Table of Contents
