Planet Networking & Communication MH-1000 User Manual page 118

192.168.2.2
www.planet2.dyndns.org
FTP
192.168.2.3
www.planet3.dyndns.org
HTTP
Step 1: Go to Configuration > WAN > Bandwidth Settings. Configure your WAN inbound and outbound
bandwidth.
Step 2: Go to Configuration > Dual WAN > General Settings and enable Load Balance mode. You may
then decide whether to enable Service Detection or not.
Remote Access from Internet
Multi-Homing Security Gateway User's Manual
www.planet3.dyndns.org
www.planet2.dyndns.org
- 114 -