Problems With Date And Time; Restoring Factory Defaults - Planet Networking & Communication MH-1000 User Manual

network device or ask them to use your router's MAC address, or configure your router to spoof your PC's
MAC address.
If an IP address can be obtained, but your PC cannot load any web pages from the Internet:
- Your PC may not recognize DNS server addresses. Configure your PC manually with DNS addresses.
- Your PC may not have the router correctly configured as its TCP/IP gateway.

5.5 Problems with Date and Time

If the date and time is not being displayed correctly, be sure to set it for your MH-1000 via the Web
Configuration Interface. Both date and time can be found under Configuration > System > Time Zone.

5.6 Restoring Factory Defaults

You can restore your MH-1000 to its factory settings by holding the Reset button on the back of your router
until the Status LED begins to blink. This will reset your router to its default settings.
Multi-Homing Security Gateway User's Manual
- 89 -