Planet Networking & Communication MH-1000 User Manual page 83

4.4.9.2 Dynamic DNS
The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname, allowing users
whose ISP does not assign them a static IP address to use a domain name. This is especially useful when
hosting servers via your WAN connection, so that anyone wishing to connect to you may use your domain
name, rather than having to use a dynamic IP address that changes periodically. This dynamic IP address
is the WAN1/WAN2 IP address of the router, which is assigned to you by your ISP. Click Edit in the
Dynamic DNS Settings Table to set related parameters for a specific interface.
You will first need to register and establish an account with the Dynamic DNS provider using their website,
Example: DYNDNS
http://www.dyndns.org/
(MH-1000 supports several Dynamic DNS providers , such as
www.dhs.org, www.dyns.cx, www.3domain.hk, www.zoneedit.com, www.3322.org,
Dynamic DNS:
- Disable: Check to disable the Dynamic DNS function.
- Enable: Check to enable the Dynamic DNS function. The following fields will be activated and required:
Dynamic DNS Server: Select the DDNS service you have established an account with.
Wildcard: Select this check box to enable the DYNDNS Wildcard.
Domain Name: Enter your registered domain name for this service.
Username: Enter your registered user name for this service.
Password: Enter your registered password for this service.
Click Apply to save your changes.
Multi-Homing Security Gateway User's Manual
www.dyndns.org
- 79 -
, www.orgdns.org ,
www.no-ip.com )