Planet Networking & Communication MH-1000 User Manual page 55

- All Destination IP: Click it to specify all source IPs.
- Specified Destination IP: Click to specify a specific destination IP address and Destination IP
Netmask.
Destination IP Address: If Specified Destination IP was chosen, here's where the IP can be entered.
Destination IP Netmask: If Specified Destination IP was chosen, here's where the subnet mask can be
entered.
Protocol: The particular protocol of Internet traffic for the specified policy. Choose from TCP, UDP, or Any.
Port Range: The range of ports for the specified policy (if you only want to use one port, enter the same
value in both boxes).
Click Apply to save your changes.
4.4.4 System
The System menu allows you to adjust a variety of basic router settings, upgrade firmware, set up remote
access, and more. In this menu are the following sections: Time Zone, Remote Access, Firmware
Upgrade, Backup/Restore, Restart, Password, System Log and Email Alert.
4.4.4.1 Time Zone
MH-1000 does not use an onboard real time clock; instead, it uses the Network Time Protocol (NTP) to
Multi-Homing Security Gateway User's Manual
- 51 -