Planet Networking & Communication MH-1000 User Manual page 101

Send Main mode third response
message of ISAKMP
Received Main mode third
response message of ISAKMP
Received Aggressive mode initial
ISAKMP Message
Send Aggressive mode first
response message of ISAKMP
Received Aggressive mode first
response message of ISAKMP
Send Aggressive mode second
message of ISAKMP
Received Aggressive mode
second ISAKP Message
Send Quick mode initial message
Received Quick mode initial
message
Send Quick mode first response
message
Received Quick mode first
response message
Send Quick mode second
message
Received Quick mode second
message
ISAKMP IKE Packet
ISAKMP Information
ISAKMP Quick Mode
Rejected IKE Messages
NO PROPOSAL CHOSEN: No acceptable Oakley Transform
NO PROPOSAL CHOSEN: No acceptable Proposal in IPsec SA
NO PROPOSAL CHOSEN: PFS is required in Quick Initial SA.
NO PROPOSAL CHOSEN: PFS is not required in Quick Initial SA.
NO PROPOSAL CHOSEN: Initial Aggressive Mode message from %s but no connection has been configured
NO PROPOSAL CHOSEN: Initial Main Mode message received on %s:%u but no connection has been
authorized
INVALID ID: Require peer to have ID %s, but peer declares %s
Sending the third response message of main mode. Done for
authentication.
Received the third response message of main mode. Done for
authentication.
Received the first message of aggressive mode.
Sending the first response message of aggressive mode. Done to
exchange proposal and key values.
Received the first response message of aggressive mode. Done to
exchange proposal and key values.
Sending the second message of aggressive mode. Done to exchange
proposal and key values.
Received the second message of aggressive mode. Done to exchange
proposal and key values.
Sending the first message of quick mode (Phase II). Done to exchange
proposal and key values (IPSec).
Received the first message of quick mode (Phase II). Done to exchange
proposal and key values (IPSec).
Sending the first response message of quick mode (Phase II). Done to
exchange proposal and key values (IPSec).
Received the first response message of quick mode (Phase II). Done to
exchange proposal and key values (IPSec).
Sending the second message of quick mode (Phase II).
Received the second message of quick mode (Phase II).
Indicates IKE packet.
Indicates Information packet.
Indicates quick mode packet.
- 97 -
Multi-Homing Security Gateway User's Manual