Planet Networking & Communication MH-1000 User Manual page 82

Multi-Homing Security Gateway User's Manual
Click on Static Route and then click Create to add a routing table.
Rule: Select Enable to activate this rule, Disable to deactivate this rule.
Destination: This is the destination subnet IP address.
Netmask: This is the subnet mask of the destination IP addresses based on above destination subnet IP.
Gateway: This is the gateway IP address to which packets are to be forwarded.
Interface: Select the interface through which packets are to be forwarded.
Cost: This is the same meaning as Hop.
Click Apply to save your changes.
- 78 -