Planet Networking & Communication MH-1000 User Manual page 88

- Try clearing your browser's cache.
1. With Internet Explorer, click Tools > Internet Options.
2. Under the General tab, click Delete Files.
3. Make sure that the Delete All Offline Content checkbox is checked, and click OK.
4. Click OK under Internet Options to close the dialogue.
- In Windows, type arp –d at the command prompt to clear you computer's ARP table.
5.2.3.1 Pop-up Windows
To use the Web Configuration Interface, you need to disable pop-up blocking. You can either disable
pop-up blocking, which is enabled by default in Windows XP Service Pack 2, or create an exception for
your MH-1000's IP address.
Multi-Homing Security Gateway User's Manual
- 84 -