Oil Cooler - HYOSUNG RX 125 Service Manual

OIL COOLER

DISASSEMBLY
● Remove the oil cooler cover.
NOTE:
Draw out and push for face of the spring seat.
● Remove the screws.
● Remove the union bolts and detach the oil cooler.
NOTE:
When reassemble after remove the union bolt, do
not remove except special case that fold of the
hose, the others, are affected according to
assemble angle.
REMOUNTING
● Remounting the oil cooler by reversing the
sequence of disassembling steps.
● Loosen the union bolt ① of the cylinder head,
and inspect the air bleeding and oil.
Union bolt : 20~25 N∙m (2.0~2.5 kg∙m)
FUEL SYSTEM 4-10
①