Tires - HYOSUNG RX 125 Service Manual

2-13 PERIODIC MAINTENANCE
REAR BRAKE
This is effected by turning the brake pedal stopper.
Be sure to tighten the lock nut securely after set-
ting the bolt.
After adjusting the rear brake height, adjust the
brake pedal traval, First set the pedal at position
for comfortable riding by turning the brake pedal
stopper, and then adjust the free travel ① to 10~20
mm.
If adjustment is necessary, trun the rear brake
adjuster ② to obtain the specific play.
Brake pedal travel
BRAKE LINING WEAR LIMIT
This motorcycle is equipped with brake lining wear
limit indicators on both rear brakes. As shown in
the illustration at right, at the condition of normal
lining wear, an extended line from the index mark
on the brake camshaft should be within the range
embossed on the brake panel with the brake on.
To check wear of the brake lining, follow the steps
below.
● First check if the brake system is properly
adjusted.
● While operating the brake, check to see that the
range on the brake panel.
● If the index mark is outside the range as shown
in the illustration at right, the brake shoe
assembly should be replaced to ensure safe
operation.

TIRES

NOTE:
Inspect lnitial 1,000 km and Every 4,000 km.
TREAD DEPTH SERVICE LIMIT
Front
Rear
Check the tire pressure, and examine the valve for
evidence of air leakage.
TIRE PRESSURE
COLD INFLATION
TIRE PRESSURE
SOLO RIDING
kpa
172
FRONT
REAR 197
10~20 mm
1.6 mm
1.6 mm
NORMAL RIDING
DUAL RIDING
kg/㎠ kpa kg/㎠
1.75 172 1.75
2.00 221 2.25
②
The extension line of the index mark is within the range.
①