HYOSUNG RX 125 Service Manual page 106

5-11 ELECTRICAL SYSTEM
STATER MOTOR REASSEMBLY
BRUSH HOLDER AND HOUSING END
When fixing brush holder to starter motor case,
align the protrusion ① of the starter motor case
with the notch ② of the brush holder.
SECURING SCREWS
Apply thread lock "1324"to starter motor securing
screws.
Thread Lock "1324"
STARTER MOTOR RELAY INSPECTION
Disconnect the lead wire of the starter motor at the
starter motor relay.
Turn on the ignition switch, inspect the continuity
between the terminals, positive and negative, when
pushing the starter button.
If the starter motor relay is in sound condition,
continuity is found.
Pocket tester : 09900-25002
Check the coil for "open" , "ground"and ohmic
resistance. The coil is in good condition of the
resistance is as follows.
Pocket tester : 09900-25002
Standard resistance Approx. 3~4Ϊ
①
②