HYOSUNG RX 125 Service Manual page 147

6-35 CHASSIS
� Rear shock absorber nut(Upper)
: 40~60 N∙m (4.0~6.0 kg∙m)
� Rear cushion lever center nut
: 70~100 N∙m (7.0~10.0 kg∙m)
� Rear cushion rod nut and bolt(Lower)
: 84~120 N∙m (8.4~12.0 kg∙m)
� Rear cushion rod nut and bolt(Upper)
: 84~120 N∙m (8.4~12.0 kg∙m)
� Rear shock absorber nut(Lower)
: 40~60 N∙m (4.0~6.0 kg∙m)
REAR SHOCK ABSORBER SPRING
ADJUSTMENT PROCEDURE
The procedure for adjusting the spring pre-load is
as follows.
● Remove the seat and frame covers.
● Remove the carburetor.
● Remove thr air cleaner case.
● Adjust the rear shock absorber by using the
special tool.
Clamp wrench : 09940-10122
● Remount the air cleaner, carburetor, seat and
frame cover.
� �
�