HYOSUNG RX 125 Service Manual page 125

6-13 CHASSIS
● Inspect the piston and cup surface for any
scratches or other damage.
● Inspect the dust seal boot for wear for damage.
REASSEMBLY
Reassemble and remount the master cylinder in the
reverse orders of disassembly and removal, and
also carry out the following steps :
CAUTION
Wash the master cylinder components with fresh
brake fluid before reassembly. Never use clean-
ing solvent or gasoline to wash them.
Apply brake fluid to the cylinder bore and all
internal parts before inserting into the bore.
● When remounting the master cylinder to the
handlebars, first tighten the clamp bolts for
upside as shown.
WARNING
Bleed air from the brake fluid circuit after
reassembling master cylinder. (See page 2-12)
Master Cylinder
Up
Clearance
Handlebar