HYOSUNG RX 125 Service Manual page 129

6-17 CHASSIS
INSPECTION
DAMPER ROD RING
Inspect the damper rod ring for wear and damage.
INNER TUBE AND OUTER TUBE
Inspect the inner tube and outer tube sliding sur-
faces for any scuffing or flaws.
FORK SPRING
Measure the fork spring free length. If it is shorter
than the service limit, replace it.
Fork spring free length
REASSEMBLY
Reassemble and remount the front fork in the
reverse order of disassembly and removal, and also
carry out the following steps :
DAMPER ROD BOLT
● Apply Bond "1215"and Thread Lock "1324"to
the damper rod bolt and tighten the bolt with
specified torque by the 19 mm socket.
Bond "1215"
Thread Lock "1324"
Service limit 555 mm