OIL PUMP
● Remove the oil pump mounting screws and take
off the oil pump body.
GEAR SHIFTER
● To remove the cam driven gear, first remove the
gear shifting shaft, and loosen the pawl lifter
and cam guide screws with an impact driver.
CAUTION
When removing the cam driven gear, do not lose
the gear shifting pawl ①, pin ② and spring ③.
KICK STARTER DRIVE GEAR AND
IDLE GEAR
● Remove the kick starter drive gear and kick
starter idle gear.
Snap ring pliers : 09900-06107
LOW END COMPONENTS
DISASSEMBLY
CRANK CASE
● Remove the sump filter cap and plug cam stopper.
● Pull out the spring, neutral stopper.
①
②
③
③
②
①
ENGINE 3-30