Carburetor - HYOSUNG RX 125 Service Manual

● Install the jet needle and retainer clip into the
throttle valve.
※ Needle clip standard position : 3rd groove
● Install the carburetor top and spring into the
throttle cable.
● Install the throttle cable into the throttle valve.
REASSEMBLY
Following adjustments and inspection are necessary
after installing the throttle valve.
● Throttle cable play. (Refer to page 2-9)
● Idling adjustment. (Refer to page 2-9)

CARBURETOR

DISASSEMBLY
● Remove the seat and fuel tank. (Refer to page 3-2)
● Remove the carburetor top. (Refer to page 4-3)
● Remove the throttle cable.
● Remove the carburetor drain screw and draw out
in the carburetor.
WARNING
Gasoline is highly explosive.
Extreme care must be taken.
● Remove the choke cable.
FUEL SYSTEM 4-4
Leaner
1st
↑
(Standard)
3rd
↓
Richer
5th