3-33 ENGINE
OIL SEAL AND BEARING
● Remove the retainer, oil seals and bearings.
Oil seal remover : 09913-50121
LOWER END COMPONENTS
INSPECTION AND SERVICING
CONROD DEFLECTION AND
CONROD BIG END SIDE CLEARANCE
Wear on the big end of the conrod can be estimat-
ed by checking the movement of the samll end of
the rod. This method can also check the extent of
wear on the parts of the conrod' s big end.
Wear limit on the big
end of conrod
Magnetic stand : 09900-20701
Dial gauge (1/100 mm) : 09900-20606
V-block : 09900-21304
Service limit
3.0 mm