HYOSUNG RX 125 Service Manual page 76

CAUTION
After mounting the oil pump in the crankcase,
rotate the pump gear by hand to see if it turns
smoothy.
● After checking the oil pump, install the oil pump
drive gear, lock washer and nut, tighten it with a
torque wrench to the specified torque and bend
up to the washer.
Conrod holder : 09910-20116
CAUTION
This is a left-hand thread nut.
Oil pump nut : 40~60 N∙m (4.0~6.0 kg∙m)
CLUTCH
ENGINE 3-46
Bend up