HYOSUNG RX 125 Service Manual page 35

3-5 ENGINE
● Disconnect the ground wire from the crankcase.
● Take off the gear shift lever by removing the bolt.
● Remove the exhaust pipe nuts and muffler
mounting bolt, then take off the muffler.
● Take out only one third of shaft after remove the
swing arm pivot nut.
● Remove engine mounting bolts ①, ②, ③, ④, ⑤
after remove the swing arm pivot nut.
● Use both hands, and lift the engine from the frame.
NOTE:
The engine must be taken out from the right side.
CAUTION
Take out only one third from the left side to the
right side swing arm pivot nut.
①
⑤
④
②
③