HYOSUNG RX 125 Service Manual page 128

● Straighten the fork and stroke it several times to
remove the oil.
● Hold the fork inverted for a few minutes.
● Remove the damper rod bolt by using the 19 mm
socket.
● Separate the inner tube from outer tube.
● Remove oil lock piece and damper rod with
rebound spring.
● Remove the snap ring by using the special tool.
Snap ring pliers : 09900-06108
● Remove the oil seal by using the special tool.
Oil seal remover : 09913-50121
CAUTION
The oil seal removed should be replaced with a
new oil seal.
CHASSIS 6-16