HYOSUNG RX 125 Service Manual page 124

● Remove the two clamp bolts and take off the
master cylinder.
● Remove the two fitting screws and separate the
cap and diaphragm.
● Drain brake fluid.
● Remove the dust seal boot.
● Remove the circlip by using the special tool.
Snap ring pliers : 09900-06108
● Remove the piston, primary cup and spring.
INSPECTION
● I n s p e c t t h e m a s t e r c y l i n d e r b o r e f o r a n y
scratches or other damage.
CHASSIS 6-12