Setting Function Protection - Muratec MFX-2590 Administrator's Manual

Setting Function Protection

Note
To set function protection, it is necessary to set an administrator password
2-4) and protect passcode
1
Press <Setting>.
2
Press the [Management] tab.
3
If an administrator password is set, press [Admin Password].
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [Function Protect Setting].
6
Enter the protect passcode, and press [Enter].
2-26 Function Protect Settings
(see page 2-7) in advance.
(see page