Registering Ldap Servers - Muratec MFX-2590 Administrator's Manual

Registering LDAP Servers

You can search for destination information such as the e-mail address and name from an
LDAP (Lightweight Directory Access Protocol) server.
You can register the following information.
Item
Name
LDAP Server Address
Port Number
LDAP Server Login
OB User Login
Account ID
Password
Search Base
Max.Number of results
Time Limit
Optional Setting
Additional Attribute
Additional String
Search Method
2-54 Specifying the Network Settings
This is the button name displayed on the screen. Up to 23
characters can be entered.
If nothing is registered, the first 23 characters of the LDAP
server address is displayed instead.
Enter the name or IP address of the LDAP server to register. Up
to 99 characters can be entered.
Enter the port number of the LDAP server.
A number between 0 and 65535 can be set, and the default value
is 389.
Set whether a login is required to access the LDAP server. Set
OB User Login, Account ID, and Password when you set this
setting to ON.
Set whether to use the OfficeBridge user information when a
login is required to access the LDAP server.
When this setting is enabled, if you register the LDAP server
authentication account and password in the user registration
of OfficeBridge, it is not necessary to enter an account and
password each time a search is performed.
Register this when not using the OfficeBridge user information
when a login is required to access the LDAP server. If you do not
register an account, the account will have to be entered when a
search is performed. Up to 49 characters can be entered.
Register this when not using the OfficeBridge user information
when a login is required to access the LDAP server.
If you do not register a password, the password will have to be
entered when a search is performed. Up to 29 characters can be
entered.
Enter the starting search position of the LDAP server. Up to 99
characters can be entered.
Set how many search results to display. An error is displayed
when the number of search results exceeds the maximum. A
number between 1 and 100 can be set, and the default value is
50.
Set the maximum amount of time until the search results
are displayed. An error is displayed when the time taken for
search results exceeds the maximum. A number between 0 and
9999 seconds can be set for the time, and the default value is 0
(unlimited).
You can add search conditions to the parameters.
Enter the search condition attribute to add. Up to 49 characters
can be entered.
Enter the search condition value to add. Up to 99 characters can
be entered.
Select the search method.
Description