Setting User Authentication; Setting The Authentication Method - Muratec MFX-2590 Administrator's Manual

Setting User Authentication

You can set authentication for the users to restrict use of the device.
There are three types of authentication methods.
Authentication method
Stand-Alone
Single Sign On
Network
Note
• When the number of registered users exceeds the limit (200 users), user registration
will not be performed and users will log in as guest, even when [Single Sign On] is
set.
• For details on the user information that is automatically registered or overwritten
when [Single Sign On] is set, refer to Chapter 3, "Setting Security" in the
OfficeBridge Guide.
• When [Single Sign On] or [Network] is set for the authentication method, it is
necessary to register a domain name in advance. Register the domain name from
the OfficeBridge screen. For details, refer to Chapter 3, "Setting Security" in the
OfficeBridge Guide.

Setting the Authentication Method

Set the authentication method for users that log in.
Note
• You can also set the authentication method using
Chapter 3, "Setting Security" in the OfficeBridge Guide.
• Do not set the machine policy from the control panel. Specifying of the machine
policy settings may fail if you do so.
1
Press <Setting>.
2
Press the [Management] tab.
3
If an administrator password is set,
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
2-32

Setting User Authentication

Performs user authentication using the user information in the machine.
User information must be registered in OfficeBridge in advance.
Performs user authentication using the user information in the machine
after performing Active Directory authentication.
If the corresponding user information is not registered in OfficeBridge,
it will automatically be newly registered. If the corresponding user
information is already registered, it will be overwritten with the
information registered in Active Directory.
Performs user authentication using the information in Active Directory.
press [Admin Password].
Description
OfficeBridge. For details, refer to