Confirming The Destination Before Transmission; Setting The Destination Confirmation Function - Muratec MFX-2590 Administrator's Manual

Confirming the Destination Before Transmission

You can prevent the transmission of faxes to the wrong destination by setting the machine
to require the entered destination to be confirmed or entered twice before transmission.
Note
For details on confirming the destination before transmission, refer to Chapter 4,
"Security Functions" in the Scanner and Fax Guide.

Setting the Destination Confirmation Function

The screen for confirming the entered destination will be displayed before starting
transmission.
1
Press <Setting>.
2
Press the [Management] tab.
3
If an administrator password is set,
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [Security Communication].
6
Press [Confirm Destination].
7
Select [ON] and press [Enter].
Press [OFF] to disable the destination confirmation function.
press [Admin Password].

Confirming the Destination Before Transmission

1
2
2-17