Activating The Pin Mask - Muratec MFX-2590 Administrator's Manual

Activating the PIN mask

To prevent unauthorized long-distance calls, some PBX (private branch exchanger)
systems require a PIN (personal identification number) entry when dialing a number.
Your machine's PIN masking feature helps you keep that PIN private.
With PIN masking activated, you can dial a number plus a PIN, but the PIN will not
appear in the journal, error message printout, delayed command list or transmission
report. The PIN may contain up to eight characters including the * or # symbols. You can
enter them from the numeric keys.
There are three possible PIN masking settings:
Off Deactivates PIN masking. Any PIN you enter will appear on the display and/or printouts
:
which show the number you dial.
Mode 1: Each remote fax machine has a PIN access code per department.
Mode 2: Each fax user has a PIN access code per department.
Note
• For details on transmitting using the PIN mask function, refer to Chapter 4, "Security
Functions" in the Scanner and Fax Guide.
• If Mode 1 is set, a PIN is registered in advance when registering a destination.
details, refer to Chapter 7, "Registering Destinations" in the Scanner and Fax Guide.
1
Press <Setting>.
2
Press the [Management] tab.
3
If an administrator password is set,
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [PIN Mode].
press [Admin Password].

Activating the PIN mask

1
2
For
2-23