Setting The Confirmation Dial Functions - Muratec MFX-2590 Administrator's Manual

Setting the Confirmation Dial Functions

When using an address book destination or entering a destination using the numeric
keys, a screen prompting you to re-enter the entered fax number is displayed. Re-entering
the number enables you to check whether an incorrect number has been entered, which
prevents the transmission of faxes to the wrong destination.
There are two confirmation dial functions you can set; confirm speed-dial and confirm
numeric keys.
Note
When using manual transmission (transmission using the [Monitor] function, an
optional handset or external phone handset), the confirm dial function is disabled,
even if you set it to ON.
„ Setting the Confirm Speed-Dial Function
1
Press <Setting>.
2
Press the [Management] tab.
3
If an administrator password is set,
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [Security Communication].
6
Press [ Confirm Dial (Speed-Dial)].
7
Select [ON] and press [Enter].
Select [OFF] to disable the confirm speed-dial function.
2-18 Confirming the Destination Before Transmission
press [Admin Password].