Muratec MFX-2590 Administrator's Manual page 111

Setting the Primary LDAP Server
„
You can set the LDAP server to use for LDAP searching from the registered LDAP
servers.
Make sure to register at least one LDAP server in advance.
1
Press <Setting>.
2
Press the [Management] tab.
3
If an administrator password is set,
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [Network Settings].
6
Press [LDAP Server Setting].
7
Press [Default Server].
8
Select the LDAP server to use, and press [Enter].
2-62 Specifying the Network Settings
press [Admin Password].