Specifying The Charge Settings - Muratec MFX-2590 Administrator's Manual

Specifying the Charge Settings

Set the required functions to ON, and set the charge per page.
1
Press <Setting>.
2
Press the [Management] tab.
3
If an administrator password is set,
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [User Access/Cost Accounting].
6
Press [Charge Setting].
7
Select the function to set.
8
Press [ON].
Press [OFF] to disable the charge setting.
press [Admin Password].
Managing User Access/Cost Accounting
1
2
2-37