Muratec MFX-2590 Administrator's Manual page 151

Symptom
Blank spots are
printed
PRINTER
PRINTER
PRINTER
PRINTER
PRINTER
PRINTER
The paper comes out
wrinkled
The entire printout is
dirty
PRINTER
The edges of the paper
are dirty
PRINTER
4-14 Troubleshooting
Cause
The paper is damp.
You are using an
inappropriate type of
paper.
The document glass is
dirty.
The ADF glass in the ADF
or the document feeder
roller is dirty.
The drum charge wire is
dirty.
The toner cartridge is worn
out or broken.
The drum cartridge is worn
out or broken.
You are using an
inappropriate type of
paper.
The paper is damp.
The document glass is
dirty.
The rear side of a duplex
printed document shows
through on the front side.
The toner cartridge is worn
out or broken.
The platen cover pad is
dirty.
Are you copying onto paper
larger than the document?
(With the ratio set to 100%)
Are the orientations of
the document and paper
different?
The document was not
reduced to match the paper
size.
Countermeasure
Replace the paper with new paper. For
details, refer to Chapter 1, "Loading Paper" in
the User's Guide.
Use an appropriate type of paper. For details,
refer to Chapter 1, "Loading Paper" in the
User's Guide.
Clean the document glass.
Clean the ADF glass or document feeder
roller. (See page 3-4 and
Clean the drum charge wire. For details, refer
to Chapter 4, "Cleaning the Printer" in the
User's Guide.
Replace the toner with a new toner cartridge.
For details, refer to Chapter 4, "Replacing the
Toner Cartridge" in the User's Guide.
Replace with a new drum cartridge. For
details, refer to Chapter 4, "Replacing the
Drum Cartridge" in the User's Guide.
Use an appropriate type of paper. For details,
refer to Chapter 1, "Loading Paper" in the
User's Guide.
Replace the paper with new paper. For
details, refer to Chapter 1, "Loading Paper" in
the User's Guide.
Clean the document glass.
When making duplex copies of a thin
document, the rear side of the document
may be scanned and printed onto the front
document. Lighten the contrast. For details,
refer to Chapter 1, "Basic Copy Settings" in
the Copier Guide, Chapter 1, "Basic Scan
Settings" in the Scanner and Fax Guide, and
Chapter 3, "Basic Faxing" in the Scanner and
Fax Guide.
Replace the toner with a new toner cartridge.
For details, refer to Chapter 4, "Replacing the
Toner Cartridge" in the User's Guide.
Clean the platen cover pad.
Select paper that is the same size as the
document. For details, refer to Chapter 1,
"Basic Copying" in the Copier Guide.
Select paper with the same orientation as the
document. Alternatively, match the document
orientation to the paper orientation.
Reduce the ratio to match the paper size.
For details, refer to Chapter 1, "Basic Copy
Settings" in the Copier Guide.
(See page 3-6.)
3-6.)
(See page 3-6.)
(See page 3-6.)