Logging In / Logging Out; Logging In - Muratec MFX-2590 Administrator's Manual

Logging In / Logging Out

To use the machine after receiving user authentication, perform a login. If you perform a
login, you can use the following functions.
• Personal settings
• Printing and transmitting documents in the user box
• TTI (using user registered information)
• Scan path notification
• Security print
• User access/cost accounting
• Journal report (with the user name printing in the sender field)
*1 These functions cannot be used when the user authentication method is set to
[Network].
Note
• For details on setting user authentication, refer to "
page 2-32.)
• When the "Guest Account Setting" is effective at Machine Policy Setting on the
OfficeBridge, press <Reset> to use the machine as a guest.

Logging In

1
Press <Login> on the
If the ready screen is not displayed, press <Reset> to display the ready screen, and then press
<Login>.
2
Select the user ID, and press [Enter].
• If the user ID entry screen is displayed, press [User ID] to select the user or enter the user
ID, and press [Enter].
• To set user authentication or the machine policy, press [Input User] to enter the user ID.
*1
(See page 1-37.)
*1
ready screen.
*1
Setting User Authentication".

Logging In / Logging Out

1
(See
1-41