Logging Out - Muratec MFX-2590 Administrator's Manual

3
Enter the password, and press [Enter].
• If a password is not set, press [Enter] without entering a password.
• The message "Failed to login." is displayed if the login fails.
Note
• Depending on the user authentication settings, you can register a new user ID in step 2.
• For details on machine policy settings, refer to Chapter 3, "
OfficeBridge Guide.

Logging Out

There are two methods for logging out after performing a user login; manual forced
logging out and logging out automatically after the logout time elapses.
Note
For details on setting the automatic logout time, see
(See page 2-71.)
Logging Out Manually
„
1
Press <Login> after performing a user login.
2
Press [Yes].
If you press [No], you will not be logged out.
1-42 Logging In / Logging Out
Setting Security" in the
"Setting the Automatic Logout Time".