Muratec MFX-2590 Administrator's Manual page 57

Editing / Deleting the Protect Passcode
„
1
Press <Setting>.
2
Press the [Management] tab.
3
If an administrator password is set,
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [Protect Passcode].
6
Enter the current protect passcode using the numeric keys, and press [Enter].
7
Enter the new passcode using the numeric keys, and press [Enter].
To delete the protect passcode, enter "0000" using the numeric keys, and press [Enter].
2-8 Setting Security Codes
press [Admin Password].