6
Press [Closed T
7
Select [ON] and press [Enter].
Press [OFF] to disable closed transmission.
Setting Closed Reception
If you set closed reception, since the sender that faxes can be received from is limited, you
can avoid receiving faxes from the wrong machine due to an entry error.
Note
•
To set the passcode, refer to "
•
For details on the communication range using closed communication and passcodes,
refer to
"Communication and Range of
1
Press <Setting>.
2
Press
the [Management] tab.
3
If an administrator password is set,
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [Security Communication].
6
Press [Closed R
2-10
Closed Communication
ransmission].
Setting the
eception].
Passcode".
(See page 2-12.)
Passcodes".
(See page 2-14.)
press [Admin Password].