Muratec MFX-2590 Administrator's Manual page 147

Message on the display
Paper size error.
Specified paper:
Load paper in Cassette 1(Cassette2,
or bypass tray). To cancel, press
[Cancel].
Open Front Cover.
Follow instruction A.
Open Front Cover.
Follow instruction A.
Printer not usable.
Checkout error.
Lamp error.
Checkout error.
Mirror cartridge error.
The toner is almost empty.
Please install a new toner cartridge.
Drum life nearing end.
Please install new drum.
Out of paper.
Please supply paper for reception.
Checkout error: code
Printer malfunctions been detected.
Paper size error.
Bypass tray size error, check the
direction and size of the paper.
Paper size error.
Open the 1st cassette (2nd cassette),
check the direction and size of the
paper.
This file is not supported.
Please check: Decode error
Memory overflow.
Not enough memory. Processing is
not complete. Please copy again.
PDF encryption error.
Please check the security setting of
the PDF file.
This file is not supported.
Please check: Decode error.
4-10 Error Messages
Description / Solution
The paper you specified on the application software is not
loaded.
To print the job, load the paper into cassette or bypass tray.
To cancel the print job, press [Cancel].
The drum charge wire needs cleaning. Open the front cover
and follow the instruction displayed on the screen to clean
the drum charge wire.
The printer is not available because the drum charge wire
is dirty. Open the front cover and follow the instruction
displayed on the screen to clean the drum charge wire.
The scanner lamp is dim or not operating.
Make repeated copies to help evaporate any internal
moisture. If that doesn't resolve the problem, contact your
authorized Muratec dealer.
The mirror carriage has become inoperable. Contact your
authorized Muratec dealer.
Your machine is almost out of toner.
Please contact your authorized Muratec dealer soon to
purchase a new toner cartridge.
Your drum needs to be replaced soon. Please contact
your authorized Muratec dealer to purchase a new drum
cartridge.
The paper ran out during fax reception. Load paper.
An internal error has occurred. Contact your authorized
Muratec dealer.
The paper specified on the application software or printer
driver is not loaded.
The file you tried to print is an unsupported file.
The machine run out of memory.
Press [Close] to see the problem (There may be paper jam,
or no paper).
The file you tried to print is an unsupported file.
Encrypted PDF files are not supported.
The file you tried to print is an unsupported file.