Muratec MFX-2590 Administrator's Manual page 39

Function
Energy Save
Mode
LCD
Brightness
Adjustment
Note
Underlined values are the default settings specified at the time of shipment.
1-32 Specifying Default Settings
Description
You can specify the settings for the low power mode
or sleep mode including the time it takes to switch
to those modes, or the time it takes to start or reset
the energy save mode.
Note
Regardless of this setting, if you press <Energy
Save> on ready screen, the low power mode will
start immediately.
Low Power Mode
l
If the machine is not used for the time set here, it
will automatically enter the low power mode.
Sleep Mode Setting
l
If the machine is not used for the amount of
time set here when in the Low Power Mode, it
automatically switches to sleep mode.
Energy Save Period
l
You can set the time it takes for the machine to
switch from the low power mode or sleep mode to
the normal state, or vice-versa.
Start Time:
When this is set to ON, you can set the time to start
the low power mode.
Reset Time:
When this is set to ON, you can set the time to
reset the low power mode.
You can set the brightness for the LCD.
Settings
Low Power Mode
1 - 60 Minutes: 1 Minute
Sleep Mode
1 - 120 Minutes: 1 Minute
Start Time
OFF
ON
Reset Time
OFF
ON
-3 - +3: 0