Figure 23 Zess Networking Configuration Figure - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Ethernet Switching Volume)
F 23 ZESS N C F
IGURE ETWORKING ONFIGURATION IGURE
Node 1-3 comprise ZESS uplink network, node 2-3 connect upper
layer network. By default, the upper layer network is connected
and simplified as that connection node 2 and node 3 connect di-
rectly, node 1 configures ZESS.
Node 1: sg1(gei_1/1,gei_1/2) connect node 2, sg2(gei_1/3,
gei_1/4) connect node 3.
Node 2: gei_1/1 connect node 3, sg1 (gei_1/3, gei_1/4) connect
node 1.
Node 3: gei_1/1 connects node 2, sg2(gei_1/3, gei_1/4) connect
node 1.
Node 1 is configured as ZESS node that domain is 1, protect in-
stance is 1 and control vlan is 4000.
Put node 2-3 port, node 1 port, and the connection port between
2 and 3 into ZESS receive-vlan 4000 table.
Node 1 configuration:
ZXR10_S1(config)#spanning-tree enable
ZXR10_S1(config)#spanning-tree mst configuration
ZXR10(config-mstp)# instance 1 vlan 100-200
ZXR10(config-mstp)#exit
ZXR10_S1(config)#interface smartgroup1
ZXR10_S1(config-smartgroup1)#switchport mode trunk
ZXR10_S1 (config-smartgroup1)#smartgroup mode 802.3ad
ZXR10_S1(config-smartgroup1)switchport trunk vlan 100-200
ZXR10_S1(config-smartgroup1)switchport trunk vlan 4000
ZXR10_S1(config-smartgroup1)exit
ZXR10_S1(config)#interface smartgroup2
ZXR10_S1(config-smartgroup2)#switchport mode trunk
ZXR10_S1 (config-smartgroup2)#smartgroup mode 802.3ad
ZXR10_S1(config-smartgroup2)#switchport trunk vlan 100-200
ZXR10_S1(config-smartgroup2)#switchport trunk vlan 4000
ZXR10_S1(config-smartgroup2)#exit
ZXR10_S1(config)#interface gei_1/1
ZXR10_S1(config-gei_1/1)#negotiation auto
ZXR10_S1(config-gei_1/1)#switchport mode trunk
ZXR10_S1(config-gei_1/1)#switchport trunk vlan 100-200
ZXR10_S1(config-gei_1/1)#switchport trunk vlan 4000
ZXR10_S1(config-gei_1/1)#smartgroup 1 mode active
ZXR10_S1(config-gei_1/1)#spanning-tree disable
86 Confidential and Proprietary Information of ZTE CORPORATION