Enhanced Function Configuration - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Ethernet Switching Volume)
Step Command
4
ZXR10(config-gei_1/x)#
{enable|disable}
5
ZXR10(config-gei_1/x)#
<1-10> timeout <2-10> mode {active|passive}
6
ZXR10(config-gei_1/x)#
remote-loopback {start|stop}
7
ZXR10(config-gei_1/x) #
link-monitor {{enable|disable}| (symbol-period
(threshold<1-65535> window <1-65535>)|(frame
(threshold<1-65535>) window <1-60>))|
(frame-period (threshold<1-65535>)(wind
ow<1-600000>)|(frame-seconds (threshold
<1-900>)(window <10-900>)) }
8
ZXR10(config)#
ry|link-monitor|satistics}]
Step Command
1
debug ethernet-oam { all | (interface
ZXR10#
<interface-name>)}
92 Confidential and Proprietary Information of ZTE CORPORATION
set ethernet-oam
set ethernet-oam period
set ethernet-oam
set ethernet-oam
show ethernet-oam [<port>{discove

Enhanced Function Configuration

Function
This enables Ethernet OAM
on port.
Enable: open port link
Ethernet-OAM function.
Disable: close port link
Ethernet-OAM function.
This configures port discovery
mode.
This enables port
remote-loopback.
Start: open link ethernet-oam
remote-loopback function.
Stop: close link ethernet-oam
remote-loopback function.
This configures port link
monitor event mode.
This shows port or global
configuration. The show
command can be used in
other modes.
Function
This opens OAM Debug
function.
If select all, all Debug
information on all ports will
be displayed on foreground.
If select interface, only one
interface Debug information
will be printed on foreground.