Svlan Cos Configuration Example; Svlan Cos Maintenance And Diagnosis - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Ethernet Switching Volume)
24 Confidential and Proprietary Information of ZTE CORPORATION
Note:
Each physical port can only apply one session. The new configura-
tion will replaces the old one. For example, configure the following
two commands on gei_1/1 interface configuration mode:
1. cos-mode cos-map-session 1
2. cos-mode cos-map-session 2
Here only 2 takes effect.
SVLAN COS Configuration
Example
For example, assume that on port gei_1/1, configure cos0 prior-
ity map is 7, cos1 priority map is 6, cos2 priority map is 5, cos3
priority map is 4, cos4 priority map is 3, cos5 priority map is 2,
cos6 priority map is 1, cos7 priority map is 7; on port gei_1/2,
configure cos1 priority map is 5.
/*configure cos session*/
ZXR10(config)# cos-session 1 cos0 7 cos1 6 cos2 5 cos3 4
cos4 3 cos5 2 cos6 1 cos7 7
ZXR10(config)#cos-session 2 cos1 5
/*apply cos session on physical port*/
ZXR10(config)#interface gei_1/1
ZXR10(config-gei_1/1)#cos-mode cos-map-session 1
ZXR10(config-gei_1/1)#exit
ZXR10(config)#interface gei_1/2
ZXR10(config-gei_1/2)#cos-mode cos-map-session 2
ZXR10(config-gei_1/2)#exit
SVLAN COS Maintenance
and Diagnosis
To perform SVLAN maintenance and diagnosis, ZXR10 5900/5200
provides the following commands to view all SVLAN session con-
figuration information.
1. This views SVLAN COS one or all session configuration.
show qos cos-session<session_id>
2. This views if a physical port applies ACL.
show running-config interface <port-name>