Figure 6 Mac Address Table Configuration Example - Zte ZXR10 5900 Series User Manual

Equipment
PC1
PC2
PC3
ZXR10 2826E
MAC Address Table
Configuration Example
As shown in Figure 6, switches A and B are connected over trunk
link smartgroup1, three PCs and a ZXR10 2826E are connected to
switch B. The details is shown as .
MAC Address
0X00D0.8765.95CA
0X00D0.8765.95CB
0X00D0.8765.95CC
----------
PC1, PC2 and PC3 work as servers, and their MAC addresses are
bound to the ports of switch B. There are a number of individual
users connecting to the ZXR10 2826E, so MAC address learning
protection (with the MAC address count as 1000 and protect time
as 120s) is need to be enabled on the proper switch B port. In
addition, it is need to set the MAC address aging time to 180s on
switch B.
F 6 MAC A
IGURE DDRESS
Configuration of switch B
/*Configure MAC address binding on the port*/
ZXR10_B(config)#mac add permanent
interface gei_1/1
ZXR10_B(config)#mac add permanent
interface gei_1/3
ZXR10_B(config)#mac add permanent
interface gei_1/5
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 MAC Address Table Configuration
Switch Port
gei_1/1
gei_1/3
gei_1/5
gei_1/7
T C
ABLE ONFIGURATION
00D0.8765.95CA
vlan 1
00D0.8765.95CB
vlan 2
00D0.8765.95CC
vlan 3
VLAN
1
2
3
4
E
XAMPLE
39