Configuring Zess; Figure 22 Zess Network Topology; Creating Zess Domain - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Ethernet Switching Volume)
Step Command
1
ZXR10(config)#
<0-16> primary <primary-interface-name>
secondary <secondary-interface-name>
2
ZXR10(config)#
Parameter
< 1-4>
< 0-16>
82 Confidential and Proprietary Information of ZTE CORPORATION
F 22 ZESS N
IGURE ETWORK

Configuring ZESS

Creating ZESS Domain

Create ZESS domain protect-instance and configure ports. Each
domain protects one instance. The maximum number of domain
is 4. This is the first step of creating ZESS.
zess domain <1-4> protect-instance
no zess domain <1-4>
Paramters Description
Description
Domain ID, it indicates ZESS domain.
ZESS protect instance, same as ZESR and STP, put service
vlan into protect instance.
T
OPOLOGY
Function
This creates ZESS Domain.
This deletes ZESS Domain.