Figure 20 Configuration Of Igmp Snooping; Igmp Snooping Configuration Example; Igmp Snooping Maintenance And Diagnosis - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Ethernet Switching Volume)
Step Command
2
ZXR10(config-vlan)#
uery-interval<interval>
3
ZXR10(config-vlan)#
out<time>
72 Confidential and Proprietary Information of ZTE CORPORATION
igmp snooping last-member-q
igmp snooping mrouter-time-
IGMP Snooping
Configuration Example
Ports gei_1/1, gei_1/3 and gei_1/5 are connected to host. Port
gei_1/7 is connected to multicast router. These ports belong to
VLAN 10. Enable IGMP Snooping on switch. This is shown in
20.
F 20 CONFIGURATION OF IGMP SNOOPING
IGURE
Configuration on the switch:
ZXR10(config)#ip igmp snooping
ZXR10(config)#ip igmp snooping mode proxy vlan 10
ZXR10(config)#vlan 10
ZXR10(config-vlan10)#igmp snooping
IGMP Snooping
Maintenance and Diagnosis
ZXR10 5900/5200 provides show command to view information
related to IGMP Snooping, to help maintenance and diagnosis.
Function
This modifies the last member
query interval.
This modifies the route port
aging time.
Figure