Configuring Vlan Translation; Configuring Supervlan - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Ethernet Switching Volume)
Step Command
1
ZXR10(config)#
<session_id> ingress-port <interface-name>
ingress-vlan <vlan-list> egress-vlan <vlanId>
2
ZXR10(config)#
3
ZXR10(config)#
<session_id> egress-port <interface-name>
egress-vlan <vlan-list> ingress-vlan <vlanId>
Example
Step Command
1
ZXR10(config)#
>|<supervlan-name>}
2
ZXR10(config-vlanX)#
3
ZXR10(config)#
{enable|disable}
4 show supervlan
ZXR10#
Example
14 Confidential and Proprietary Information of ZTE CORPORATION
Configuring VLAN
Translation
vlan translate session-no
show vlan translate
vlan egr-translate session-no
Port gei_1/1 receives a packet which belongs to vlan100. This
packet is to be sent to xgei_2/1. Port xgei_2/1 belongs to VLAN
200. As for the downlink data, users hope that VLAN 200 for-
warded from xgei_2/1 is converted to VLAN 100.
The detailed configuration is as follows:
Configuration of switch:
ZXR10(config)#vlan translate session-no 1
ingress-port gei_1/1 ingress-vlan 100 egress-vlan 200
ZXR10(config)#vlan egr-translate session-no 1
egress-port gei_1/1 egress-vlan 200 ingress-vlan 100
ZXR10(config)#interface gei_1/1
ZXR10(config-gei_1/1)#ingress filtering disable
ZXR10(config-gei_1/1)#switchport mode hybrid
ZXR10(config-gei_1/1)#switchport hybrid vlan 100,200
ZXR10(config-gei_1/1)#exit
ZXR10(config)#interface gei_2/1
ZXR10(config-gei_2/1)#switchport mode hybrid
ZXR10(config-gei_2/1)#switchport hybrid vlan 200
ZXR10(config-gei_2/1)#exit

Configuring SuperVLAN

interface {supervlan <supervlan-id
supervlan <supervlan-id>
supervlan inter-subvlan-routing
As shown in Figure
subnet as 10.1.1.0/24 and gateway as 10.1.1.1. Configure two
Function
This configures VLAN
Translation.
This views the configuration
of VLAN Translation.
This configures VLAN
egr-translation.
Function
This creates a SuperVLAN.
This adds sub-VLANs onto
SuperVLAN.
This enables/disables routing
function among sub-VLANs.
This views SuperVLAN
configuration information.
5, configure a SuperVLAN on switch A, with its