Restricting A Multicast Group; Configuring Static Igmp Snooping; Modifying Default Time - Zte ZXR10 5900 Series User Manual

Command
ip igmp snooping mode proxy vlan <vlan
ZXR10(config)#
id>
Step Command
1
ZXR10(config-vlanX)#
2
ZXR10(config-vlanX)#
num <number>
3
ZXR10(config-vlanX)#
oup<ip-address>[limit-num<num>]
Step Command
1
ZXR10(config-vlanX)#
<ip-address> interface <port-name>
2
ZXR10(config-vlanX)#
interface <port-name>
Step Command
1
ZXR10(config-vlan)#
<time>

Restricting a Multicast Group

igmp snooping acl<acl-number>
igmp snooping max-group-
igmp snooping max-host-in-gr

Configuring Static IGMP SNOOPING

The static configuration is not aging but deleted statically.
igmp snooping static
igmp snooping mrouter

Modifying Default Time

igmp snooping host-time-out
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 8 IGMP Snooping Configuration
Function
This enables IGMP proxy
function.
Function
This makes a ACL filtering for
multicast group.
This configures maximum
group number allowed by the
VLAN.
This configures maximum
host group allowed by the
VLAN.
Function
This configures static user
in VLAN. If a user needs to
join a multicast group without
IGMP. IGMP snooping cannot
monitor the request. In this
case, static configuration can
be made.
This configures multicast
route port in the VLAN.
This command is used
when PIM-Snooping is not
configured or connecting
multicast router that does not
send query packets.
Function
This modifies aging time of
the user.
71