Zte ZXR10 5900 Series User Manual page 110

ZXR10 5900/5200 Series User Manual (Ethernet Switching Volume)
Step Command
10
ZXR10(config-md-ma)#
11
ZXR10(config-md-ma)#
12
ZXR10(config-md-ma)#
<1-64><1-8191> direction {down|up}
13
ZXR10(config-md-ma)#
name <mipname>
14
ZXR10(config-md-ma)#
<1-64><1-8191> remote-mac <xxxx.xxxx.xxxx>
15
ZXR10(config-md-ma)#
sion <1-64>)|all}
16
ZXR10(config-md-ma)#
<1-64>)|all}
17
ZXR10(config-md-ma)#
interface <interfacename>
98 Confidential and Proprietary Information of ZTE CORPORATION
speed {slow|fast}
ccm timer-interval <1-7>
create mep session
create mip session <1-64>
create rmep session
delete mep {<1-8191>|(ses
delete mip { (session
assign mep <1-8191> to
Function
This sets MA CCM sending
fast and slow mode.
The default is slow.
{slow|fast}: set MA allowed
CCM sending packet fast or
slow.
This sets CCM sending time
interval.
This sets CCM sending time
interval.
When MA configures as fast,
only set the value of 1-3.
When MA configures as slow,
only set the value of 4-7.
create MEP in MA mode.
Currently, support MEP that
direction is down and can only
configure a local MEP in a MA.
Theoretically the whole device
supports 32K MPs(in fact, it
is decided by switch memory
condition).
create MIP in MA mode.
Creat at most 64 mps in
one MA, the whole device
supports 512 MAs.
This creates remote-mep.
Creat at most 64 mps in
one MA, the whole device
supports 512 MAs.
This deletes MEP.
Delete mep command can
delete a designated MEP by
index number and session
number. Also can delete the
current all MEPs in MA by
select all,here MEP includes
RMEP.
This deletes MIP.
When deleting MIP ,can
delete the designated session
number MIP or delete all MIPs
in the current MA.
This assigns MEP to port.
When assigning port for MEP,
the MIP that level is lower
than or equal to current MEP
level can't exist on the port
in the same vlan same level.
can't assign port for one MEP
many times.