Configuring Zesr And Svlan Linkage Networking; Configuring Svlan - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Ethernet Switching Volume)
Example
26 Confidential and Proprietary Information of ZTE CORPORATION
Configuring ZESR and
SVLAN Linkage Networking

Configuring SVLAN

1. To configure SVLAN,
refer to SVLAN configuration.
2. To configure other uplink ports,
refer to VLAN configuration.
Note:
1. When configuring SVLAN based on ACL, configure downlink
data flow is not redirection.
2. The designated uplink port when configuring SVLAN is totally
equivalent to the ordinary port that has the same VLAN at-
tribute. The packet with double-layer tag will be broadcast in
VLAN that outer tag designates.
The example shows how to configure SVLAN.
ZXR10(config)#vlan qinq extend-session-no 1 customer-port
gei_1/1 uplink-port gei_1/2 in-vlan 10 ovlan 100 unredirect
ZXR10(config)#interface gei_1/1
ZXR10(config-gei_1/1)#switchport qinq customer
ZXR10(config-gei_1/1)#switchport mode hybrid
ZXR10(config-gei_1/1)#switchport hybrid native vlan 10
ZXR10(config-gei_1/1)#switchport hybrid vlan 10,100 untag
ZXR10(config-gei_1/1)#exit
ZXR10(config)#interface gei_1/2
ZXR10(config-gei_1/2)#switchport mode trunk
ZXR10(config-gei_1/2)#switchport trunk native vlan 100
ZXR10(config-gei_1/2)#switchport trunk vlan 100
ZXR10(config-gei_1/2)#exit
ZXR10(config)#interface gei_1/3
ZXR10(config-gei_1/3)#switchport mode trunk
ZXR10(config-gei_1/3)#switchport trunk native vlan 100
ZXR10(config-gei_1/3)#switchport trunk vlan 100
ZXR10(config-gei_1/3)#exit
ZXR10(config)#interface gei_1/4
ZXR10(config-gei_1/4)#switchport mode trunk
ZXR10(config-gei_1/4)#switchport trunk native vlan 100
ZXR10(config-gei_1/4)#switchport trunk vlan 100
ZXR10(config-gei_1/4)#exit