Zte ZXR10 5900 Series User Manual page 77

gei_1/7 11
gei_1/8 10
ZXR10(config)#
When both protocol transmitted packets Tx and protocol re-
ceived packets Rx of each member port are not zero, aggrega-
tion succeeds. Otherwise, the aggregation fails.
3. This example shows how to view the member port of the op-
posite side of trunk group 2.
ZXR10(config)#show lacp 2 neighbors
Smartgroup 2 neighbors
Actor Partner
Port System ID
---------------------------------------------------------------
gei_1/7 0x8000,00d0.d0c0.0f60
gei_1/8 0x8000,00d0.d0c0.0f60
ZXR10(config)#
Partner Port number represents the port number of the part-
ner. When Port State is 0x3d, it indicates that the aggregation
succeeds.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Link Aggregation Configuration
5 0 0
6 0 0
Partner Port
Port No. Priority
323 0x8000
324 0x8000
0 0
0 0
Oper Port
Key State
0x202 0x3d
0x202 0x3d
65