Zesr And Svlan Linkage Networking Configuration; Zesr And Svlan Linkage Networking Overview - Zte ZXR10 5900 Series User Manual

4
C h a p t e r
ZESR and SVLAN
Linkage Networking
Configuration
Table of Contents

ZESR and SVLAN Linkage Networking Overview.....................25

Configuring ZESR and SVLAN Linkage Networking .................26
Configuration Example .......................................................28
ZESR and SVLAN Linkage
Networking Overview
ZESR and SVLAN linkage networking is applicable for multi-ring
multi-domain network. SVLAN can switch ports quickly according
to ring's connectivity status when fault occurs on the node of ring.
When configuring SVLAN, each configuration data only can des-
ignate a customer port as an uplink port. Meanwhile, a group
of in-vlan and customer port only can configure a SVLAN data.
Therefore it is necessary to configure vlan attribute of another port
same as that of uplink port for designating multiple uplink ports
for SVLAN.
Configure SVLAN and VLAN two different uplink ports, one is active
and another is standby. But only one port can be active at one
time, maintain only one logically connective route between any
two nodes controlled by ZESR configuration.
Confidential and Proprietary Information of ZTE CORPORATION 25