Zte ZXR10 5900 Series User Manual page 30

ZXR10 5900/5200 Series User Manual (Ethernet Switching Volume)
Step Command
1
ZXR10(config)#
customer-port <interface-name> uplink-port
<interface-name> in-vlan <vlan-list>{ovlan
{<vlanId>|<name>}[ priority < priority-id>]| untag
}
2
ZXR10(config)#
<session_id> customer-port < interface-name
> uplink-port < interface-name >{in-vlan
<vlan-list>|outer-vlan <vlanId>| untag
}[outer-vlan <vlanId>]{ovlan <vlanId>[
priority < priority-id >| map ]| helpvlan
<helpvlanId>}[unredirect]
Parameter
session-no
customer-port
uplink-port
in-vlan
ovlan
Priority
untag
extend-session-no
untag
outer-vlan
map
helpvlan
unredirect
18 Confidential and Proprietary Information of ZTE CORPORATION
vlan qinq session-no <session_id>
vlan qinq extend-session-no
Paramters Description:
Description
<1 - 768>
CUSTOMER port, which connects user.
UPLINK port, which connects service provider.
VID of CVLAN
VID of SPVLAN
designate SPVLAN 802.1p priority <0~7>
transparent transportation CVLAN TAG
<1 - 1000>
Not carrying CVLAN or VID of CVLAN is 0.
The packet has two layer tages before entering into customer
port, it designates outer VID.
designate 802.1p priority in SPVLAN as 802.1p priority in
CVLAN.
When transporting CVLAN TAG transparently, the needed
auxiliary VLAN VID. When single tag transporting
transparently, packet only carries CVLAN TAG when
sended from UPLINK port. When double tags transporting
transparently, auxiliary VLAN VID should be the same as
outer one. The packet still has two layer tags sended from
UPLINK port.
The downlink packet received from uplink port needn't
redirect to customer port forcibly.
2. To delete SVLAN configuration, use the following command.
Function
This command configures
SVLAN.
This command configures
SVLAN.