Configuring Cfm; Basic Configuration - Zte ZXR10 5900 Series User Manual

Step Command
1 cfm {enable|disable}
ZXR10(config)#
2 cfm create md session <1-16> name
ZXR10(config)#
<mdname> level <0-7>
3
cfm delete md <1-16>
ZXR10(config)#
4 cfm md session <1-16>
ZXR10(config)#
5
ZXR10(config-md)#
<maname>
6
ZXR10(config-md)#
7
ZXR10(config-md)#
8
ZXR10(config-md-ma)#
9
ZXR10(config-md-ma)#

Configuring CFM

Basic Configuration

ma create session <1-32> name
ma delete {<1-32>|<maname>}
ma session <1-32>
protect {vlan|link}
primary vlan <1-4094>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 11 Ethernet OAM Configuration
Function
This enables CFM in global
configuration mode.
Enable: enable CFM
Disable: close CFM
Establish and configure MD
attribute. When establishing
successfully ,enter into MD
mode automatically.
The whole device supports 16
MDs.
This deletes MD.
This enters into MD
configuration mode.
This creates MA.
Firtly, enter into MD mode.
When establishing
successfully, enter into
CFM MA mode.
One MD supports at most 32
MAs and the name of MA is
global unique.
This deletes MA.
This enters into MA
configuration mode.
This sets MA protection mode.
The protection link mode can
be only used when md's level
is 0.
The current MA only has
protect vlan an protect link
modes.
This sets MA main vlan.
No matter whether ma's
protection mode is vlan or
link, main vlan of ma need to
be configured.
97